Skip to content
leadfootautomotive
  • Home
  • Car MaintenanceExpand
    • Car Jump Starter
  • Car ElectronicsExpand
    • Dash Cams
    • OBD2 Scanner
  • Car Accessories
  • Car Cleaning
  • Car Safety
  • Car Calculators
leadfootautomotive
  • Do OBD2 Codes Have a History
    OBD2 Scanner

    Do OBD2 Codes Have a History? Stored vs Permanent

    ByAlex Rahman November 2, 2026November 1, 2026

    Quick Answer Yes, in a limited sense. A vehicle can keep a record of a fault after the check engine light goes out, and a scanner may label that record as stored or history. That is not a lifetime log: ordinary codes can be cleared and age out, while only permanent emissions codes survive a…

    Read More Do OBD2 Codes Have a History? Stored vs PermanentContinue

  • Can an OBD2 Scanner Diagnose a Used Car
    OBD2 Scanner

    Can an OBD2 Scanner Diagnose a Used Car? Yes, Partly

    ByAlex Rahman November 2, 2026November 1, 2026

    Quick Answer Yes, partly. An OBD2 scanner can diagnose many electronic and emissions-related faults in a used car, but it cannot give a complete verdict on the car. It reports what the car’s computers have detected, not the condition of parts, bodywork, or systems those computers do not monitor. A used car can look clean…

    Read More Can an OBD2 Scanner Diagnose a Used Car? Yes, PartlyContinue

  • What Are CAN Pins on an OBD2 Connector
    OBD2 Scanner

    What Are CAN Pins on an OBD2 Connector? Explained

    ByAlex Rahman November 2, 2026November 1, 2026

    Quick Answer On a standard OBD2 connector, the CAN pins are pin 6 (CAN High) and pin 14 (CAN Low). Together they carry the two-wire Controller Area Network signal that lets a scan tool talk to the vehicle. They do not supply power to the scan tool; that job belongs to pin 16. Pins 6…

    Read More What Are CAN Pins on an OBD2 Connector? ExplainedContinue

  • What Is ISO 15765 OBD2
    OBD2 Scanner

    What Is ISO 15765 OBD2? CAN Diagnostics Explained

    ByAlex Rahman November 2, 2026November 1, 2026

    Quick Answer ISO 15765 is the family of standards for vehicle diagnostics over Controller Area Network (CAN). In everyday OBD2 use, it usually means ISO 15765-4: the CAN-based rules that let a scan tool talk to a car’s emissions systems through pins 6 and 14, normally at 500 kbit/s or 250 kbit/s. When a scanner…

    Read More What Is ISO 15765 OBD2? CAN Diagnostics ExplainedContinue

  • How Long Do OBD2 Monitors Take to Become Ready
    OBD2 Scanner

    How Long Do OBD2 Monitors Take to Become Ready? Explained

    ByAlex Rahman November 2, 2026November 1, 2026

    Quick Answer Most OBD2 monitors become ready after a few days of mixed city and highway driving, often within 50 to 100 miles. A single well-matched drive cycle can set many monitors in 30 to 60 minutes, but EVAP and some other non-continuous monitors may need several cold starts and several days, especially if fuel…

    Read More How Long Do OBD2 Monitors Take to Become Ready? ExplainedContinue

  • Can OBD2 Detect an Oxygen Sensor Problem
    OBD2 Scanner

    Can OBD2 Detect an Oxygen Sensor Problem? Yes, With Limits

    ByAlex Rahman November 2, 2026November 1, 2026

    Quick Answer Yes. OBD2 is designed to watch oxygen sensors and can detect many sensor problems through dedicated sensor codes, heater-circuit checks, response-rate tests, and live sensor data. It cannot always prove that the sensor itself is faulty, because wiring, exhaust leaks, and other engine faults can produce a similar signal. On an OBD2 vehicle,…

    Read More Can OBD2 Detect an Oxygen Sensor Problem? Yes, With LimitsContinue

  • Why Freeze Frame Data Is Useful for OBD2 Diagnosis
    OBD2 Scanner

    Why Freeze Frame Data Is Useful for OBD2 Diagnosis

    ByAlex Rahman November 2, 2026November 1, 2026

    Quick Answer Freeze frame data is useful because it adds the conditions behind a fault code: what the engine was doing, how hard it was working, and whether it was cold or warm when the fault was set. A code alone says what was detected. The freeze frame helps explain when and under what conditions…

    Read More Why Freeze Frame Data Is Useful for OBD2 DiagnosisContinue

  • What Does Vehicle Speed PID Show
    OBD2 Scanner

    What Does Vehicle Speed PID Show? Explained

    ByAlex Rahman November 2, 2026November 1, 2026

    Quick Answer The vehicle speed PID shows the car’s current road speed as reported by its powertrain control system, in kilometres per hour. In standard OBD2 terms it is Mode 01 PID 0x0D: one data byte, read directly as km/h, with a range of 0 to 255. It is a live speed reading, not a…

    Read More What Does Vehicle Speed PID Show? ExplainedContinue

  • Can OBD2 Reveal Transmission Problems Before Buying a Car
    OBD2 Scanner

    Can OBD2 Reveal Transmission Problems Before Buying a Car?

    ByAlex Rahman November 2, 2026November 1, 2026

    Quick Answer Yes, an OBD2 scanner can reveal transmission problems before buying a car, but only if active fault codes are stored, pending codes are present, or sensor data parameters indicate abnormal behavior. It can uncover hidden transmission trouble codes (DTCs), monitoring failures, and erratic fluid temperature or gear ratio slips, though it cannot detect…

    Read More Can OBD2 Reveal Transmission Problems Before Buying a Car?Continue

  •  Can OBD2 Show Transmission Pressure
    OBD2 Scanner

     Can OBD2 Show Transmission Pressure? | Explained

    ByAlex Rahman November 2, 2026November 1, 2026

    Quick Answer Sometimes, but not on every car and not with a basic generic scan. A scanner can show transmission pressure only when the vehicle exposes that value and the tool can read the transmission module or the relevant manufacturer-specific data. On many cars, what looks like pressure is only the pressure the computer has…

    Read More  Can OBD2 Show Transmission Pressure? | ExplainedContinue

  • Can OBD2 Diagnose a Wheel Speed Sensor
    OBD2 Scanner

    Can OBD2 Diagnose a Wheel Speed Sensor? ABS Explained

    ByAlex Rahman November 2, 2026November 1, 2026

    Quick Answer Yes, but only with a scan tool that can reach the ABS module. A basic engine-only reader often shows no codes at all. An ABS-capable tool can read the chassis code for the affected wheel and compare live wheel speeds, narrowing the fault to one corner and circuit, but it cannot alone prove…

    Read More Can OBD2 Diagnose a Wheel Speed Sensor? ABS ExplainedContinue

  • OBD2 scanner connected beneath a car dashboard for ECU diagnostics and code clearing.
    OBD2 Scanner

    Can an OBD2 Scanner Reset the ECU?

    ByAlex Rahman November 1, 2026October 31, 2026

    Quick Answer Yes, an OBD2 scanner can reset certain ECU functions, depending on the vehicle and scanner. Most basic scanners can clear stored engine trouble codes, but this is not the same as factory-resetting, reprogramming, or replacing the ECU’s learned settings. For a broader explanation, see this guide to using an OBD2 scanner correctly. What…

    Read More Can an OBD2 Scanner Reset the ECU?Continue

  • Cheap and expensive OBD2 scanners displayed side by side on an automotive workbench.
    OBD2 Scanner

    What’s the Difference Between a Cheap and Expensive OBD2 Scanner?

    ByAlex Rahman November 1, 2026October 31, 2026

    Quick Answer A cheap OBD2 scanner typically reads and clears basic engine trouble codes, while an expensive scanner may diagnose ABS, airbag, transmission, and other vehicle systems. Higher-priced models can also offer advanced live data, bidirectional controls, service functions, and better diagnostic guidance. For occasional check-engine-light checks, a basic reader may be enough; for regular…

    Read More What’s the Difference Between a Cheap and Expensive OBD2 Scanner?Continue

  • Can OBD2 Calculate Volumetric Efficiency
    OBD2 Scanner

    Can OBD2 Calculate Volumetric Efficiency? Yes, With Limits

    ByAlex Rahman November 1, 2026October 31, 2026

    Quick Answer Yes, OBD2 can calculate volumetric efficiency, but it does not report it directly. A scanner or app must estimate it from live data, usually mass airflow, engine speed, engine size, and intake air density. The result is a useful diagnostic estimate, not a factory measurement. What Volumetric Efficiency Actually MeasuresVolumetric efficiency, or VE,…

    Read More Can OBD2 Calculate Volumetric Efficiency? Yes, With LimitsContinue

  • Does OBD2 Work Worldwide
    OBD2 Scanner

     Does OBD2 Work Worldwide? Regional Compatibility Explained

    ByAlex Rahman November 1, 2026October 31, 2026

    Quick AnswerOBD2 does not work identically worldwide. The 16-pin connector is widely used, but legal compliance and the underlying diagnostic protocols vary by region, fuel type, and model year. A generic scanner may read basic emissions codes in many countries, but full manufacturer-level access often depends on region-specific software, vehicle market, and the tool’s coverage…

    Read More  Does OBD2 Work Worldwide? Regional Compatibility ExplainedContinue

Page navigation

Previous PagePrevious 1 … 11 12 13 14 15 … 76 Next PageNext

© 2026 LeadFootAutomotive. All Rights Reserved. Driving Your Passion with Expert Automotive Insights.

  • Home
  • About US
  • Contact Us
  • Privacy Policy
  • Terms & Conditions
  • Affiliate Disclosure
Facebook X Instagram
Verification: 2af652633347f1f4
×
REDTIGER 4K Dash Cam Built-in WiFi GPS
Recommended Product
REDTIGER 4K Dash Cam Built-in WiFi GPS
Check Amazon →
  • Home
  • Car Maintenance
    • Car Jump Starter
  • Car Electronics
    • Dash Cams
    • OBD2 Scanner
  • Car Accessories
  • Car Cleaning
  • Car Safety
  • Car Calculators